Tiger-Vac, as the manufacturer, GUARANTEES, that these units of category 1 & 2, can be used to safely recover combustible /conductive dusts and/or flammable liquids.
The ATEX marking certifies only, by it's Ingress of Protection (IP), the capacity of the vacuum cleaner to be in the presence of combustible /conductive dusts and/or flammable liquids but does not certify the capacity of the vacuum cleaner to recover them.
ATEX industrial vacuum cleaners for the recovery & neutralization of Conductive & Explosive Dusts
ATEX Category 2 Explosion Proof Vacuum Cleaner Systems for ATEX Zone 1 (Gas) and ATEX Zone 21 (Dust)
Electrically Operated Models
0081 
II 2 G/D EEx d IIB T4IP6X - T135oC
LCIE 03 ATEX 6295
- Legally certified explosion proof/dust ignition proof vacuum cleaner
- Less than 10 Ohms of resistivity
- Coalescing Filter Element (CFE) for moisture removal
- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for the recovery and neutralization of conductive and explosive dust into a liquid immersion bath
- Continuous duty single or 3-phase explosion proof/dust ignition proof motor
- Dry recovery only
- Stainless steel AISI 304 Interceptor tank
- Recovery capacity of 1 gallon (4 liters) of dust into 5 gallons (20 liters) of liquid
- Equipped with a heavy duty powder coated Hydraulic Cart for easy emptying of recovered materials.
Stainless steel Interceptor tank and powder coated Hydraulic Cart. Less than 10 Ohms of resistivity. This unit is equipped with a Coalescing Filter Element (CFE) for moisture removal. An optional true HEPA Filter (H14) is also available. This unit has been designed for the recovery of metallic, conductive and explosive dusts into an immersion liquid bath such as water, parafiin oil, mineral oil, etc. This unit renders any hazardous dust inert. This unit can be converted for the recovery of fuel, solvents and acids. The heavy duty powder coated Hydraulic Cart allows for the unit to be lifted up to 36" (91 cm) above the ground so that contents can be emptied into a recovery container for disposal.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
CFE - Coalescing Filter Element
The Coalescing filter element is used for the removal of solid particles, water and oil aerosols.
10 Ohms - Explosion Proof Requirement
In order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms from the grounded air supply hose to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof and be part of Tiger-Vac's quality control management system ISO 9001:2000.
When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.
| Name | Description | Download |
| CD-IT EX (CFE) HY-C Brochure (Metric) | Technical data for CD-IT EX (CFE) HY-C in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| CD-IT EX (CFE) HY-C Brochure (Imperial) | Technical data for CD-IT EX (CFE) HY-C in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas | Certification Document | download |
0081 II 2 G/D EEx d IIB T4IP6X - T135oC
LCIE 03 ATEX 6295
- Legally certified explosion proof/dust ignition proof vacuum cleaner
- Less than 10 Ohms of resistivity
- Coalescing Filter Element (CFE) for moisture removal
- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for the recovery and neutralization of conductive and explosive dust into a liquid immersion bath
- Continuous duty single or 3-phase explosion proof/dust ignition proof motor
- Dry recovery only
- Stainless steel AISI 304 Interceptor tank
- Recovery capacity of 2.5 gallons 10 liters) of dust into 12.5 gallons (50 liters) of liquid
- Equipped with a heavy duty powder coated Hydraulic Cart for easy emptying of recovered materials.
Stainless steel Interceptor tank and powder coated Hydraulic Cart. Less than 10 Ohms of resistivity. This unit is equipped with a Coalescing Filter Element (CFE) for moisture removal. An optional true HEPA Filter (H14) is also available. This unit has been designed for the recovery of metallic, conductive and explosive dusts into an immersion liquid bath such as water, parafin oil, mineral oil, etc. This unit renders any hazardous dust inert. This unit can be converted for the recovery of fuel, solvents and acids. the heavy duty powder coated Hydraulic Cart allows for the unit to be lifted up to 36" (91 cm) above the ground so that contents can be emptied into a recovery comtainer for disposal.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
CFE - Coalescing Filter Element
The Coalescing filter element is used for the removal of solid particles, water and oil aerosols.
10 Ohms - Explosion Proof Requirement
In order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms from the grounded air supply hose to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof and be part of Tiger-Vac's quality control management system ISO 9001:2000.
When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.
| Name | Description | Download |
| CD-IT (55) EX (CFE) HY-C Brochure (Metric) | Technical data for CD-IT (55) EX (CFE) HY-C in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| CD-IT (55) EX (CFE) HY-C Brochure (Imperial) | Technical data for CD-IT (55) EX (CFE) HY-C in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas | Certification Document | download |
Pneumatic (Air) Models
II 2 G/D c IIC T6 (85oC)
LCIE 03 ATEX 6310
- Legally certified explosion proof/dust ignition proof vacuum cleaner
- Less than 10 Ohms of resistivity
- Coalescing Filter Element (CFE) for moisture removal
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for the recovery and neutralization of conductive and explosive dust into a liquid immersion bath
- Pneumatically (air) operated
- Dry recovery only
- Stainless steel AISI 304 Interceptor tank
- Recovery capacity of 1 gallon (4 liters) of dust into 5 gallons (20 liters) of liquid
- Equipped with a heavy duty powder coated Hydraulic Cart for easy emptying of recovered materials.
Stainless steel Interceptor tank and powder coated Hydraulic Cart. Less than 10 Ohms of resistivity. This unit is equipped with a Coalescing Filter Element (CFE), located upstream, for moisture removal as well as a true HEPA Filter (H14) located downstream. This unit has been designed for the recovery of metallic, conductive and explosive dusts into an immersion liquid bath such as water, parafin oil, mineral oil, etc. This unit renders any hazardous dust inert. This unit can be converted for the recovery of fuel, solvents and acids. The heavy duty powder coated Hydraulic Cart allows for the unit to be lifted up to 36" (91 cm) above the ground so that contents can be emptied into a recovery container for disposal.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
CFE - Coalescing Filter Element
The Coalescing filter element is used for the removal of solid particles, water and oil aerosols.
10 Ohms - Explosion Proof Requirement
In order for Tiger-Vac to legally certify an Explosion Proof/Dust Ignition Proof vacuum cleaner system the unit must be static dissipative (SD*) and conductive and have a resistivity measuring less than 10 Ohms from the grounded air supply hose to any point on the vacuum cleaner system. This makes the unit eligible to be Explosion Proof/Dust Ignition Proof and be part of Tiger-Vac's quality control management system ISO 9001:2000.
When using a pneumatic Explosion Proof Vacuum Cleaner System the customer must make sure that the source of air supply (compressor) is grounded.
| Name | Description | Download |
| SS-IT EX (HY-C) RE HEPA Brochure (Metric) | Technical data for SS-IT EX (HY-C) RE HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| SS-IT EX (HY-C) RE HEPA Brochure (Imperial) | Technical data for SS-IT EX (HY-C) RE HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX Vacuum Cleaners pneumatically (air) operated to be used in Hazardous Areas | Certification Document | download |
Note:
HEPA Filters - efficiency of 99.995% on 0.3 microns - Tested IEST RP-CC001.3 - H14 as per MPPS method EN 1822.
ULPA Filters - efficiency of 99.999% on 0.3 microns - Filtration efficiency of 99.9995% on 0.18 microns - Tested IEST RP-CC001.3 - U15 as per MPPS method EN 1822
Please be advised that all Tiger-Vac HEPA/ULPA Filters are DOP tested when assembled, either upstream or downstream, inside of the vacuum cleaners.
All Tiger-Vac HEPA/ULPA Filters are assembled mechanically with 3 bolts and include a specially designed memory gasket in order to prevent any leaks during the life span of the gasket thus insuring the health and safety of the end user.
