Tiger-Vac, como fabricante GARANTIZA que sus aspiradores de catégoria 1 y 2, pueden ser Útilizados para récuperar con toda seguridad polvos combustibles/conductivos y/o liquidos inflamables.
La marcacion ATEX certificada por medio de su indice de proteccion(IP),la capacidad del aspirador de estar en presencia donde hay polvos combustibles/conductivos y/o liquidos inflamables. pero no certifica la capacidad del aspirador para récuperar dichos materiales.
Aspiradores industriales ATEX para récuperar y neutralizar polvos explosivos y conductivos.
Aspiradores Categoria 2 Antidéflagrantes à prueba de inflammaciones de polvo explosivo ATEX Zona 1 (Gas) y ATEX Zona 21 (Polvo)
Modelos de funcionamiento eléctrico
0081 
II 2 G/D EEx d IIB T4IP6X - T135oC
LCIE 03 ATEX 6295
- Legally certified explosion proof/dust ignition proof vacuum cleaner
- Less than 10 Ohms of resistivity
- Coalescing Filter Element (CFE) for moisture removal
- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for the recovery and neutralization of conductive and explosive dust into a liquid immersion bath
- Continuous duty single or 3-phase explosion proof/dust ignition proof motor
- Dry recovery only
- Stainless steel AISI 304 Interceptor tank
- Recovery capacity of 1 gallon (4 liters) of dust into 5 gallons (20 liters) of liquid
- Equipped with a heavy duty powder coated Hydraulic Cart for easy emptying of recovered materials.
Stainless steel Interceptor tank and powder coated Hydraulic Cart. Less than 10 Ohms of resistivity. This unit is equipped with a Coalescing Filter Element (CFE) for moisture removal. An optional true HEPA Filter (H14) is also available. This unit has been designed for the recovery of metallic, conductive and explosive dusts into an immersion liquid bath such as water, parafiin oil, mineral oil, etc. This unit renders any hazardous dust inert. This unit can be converted for the recovery of fuel, solvents and acids. The heavy duty powder coated Hydraulic Cart allows for the unit to be lifted up to 36" (91 cm) above the ground so that contents can be emptied into a recovery container for disposal.
| Name | Description | Download |
| CD-IT EX (CFE) HY-C Brochure (Metric) | Technical data for CD-IT EX (CFE) HY-C in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| CD-IT EX (CFE) HY-C Brochure (Imperial) | Technical data for CD-IT EX (CFE) HY-C in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas | Certification Document | descargar |
0081 II 2 G/D EEx d IIB T4IP6X - T135oC
LCIE 03 ATEX 6295
- Legally certified explosion proof/dust ignition proof vacuum cleaner
- Less than 10 Ohms of resistivity
- Coalescing Filter Element (CFE) for moisture removal
- HEPA Filter - Optional with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for the recovery and neutralization of conductive and explosive dust into a liquid immersion bath
- Continuous duty single or 3-phase explosion proof/dust ignition proof motor
- Dry recovery only
- Stainless steel AISI 304 Interceptor tank
- Recovery capacity of 2.5 gallons 10 liters) of dust into 12.5 gallons (50 liters) of liquid
- Equipped with a heavy duty powder coated Hydraulic Cart for easy emptying of recovered materials.
Stainless steel Interceptor tank and powder coated Hydraulic Cart. Less than 10 Ohms of resistivity. This unit is equipped with a Coalescing Filter Element (CFE) for moisture removal. An optional true HEPA Filter (H14) is also available. This unit has been designed for the recovery of metallic, conductive and explosive dusts into an immersion liquid bath such as water, parafin oil, mineral oil, etc. This unit renders any hazardous dust inert. This unit can be converted for the recovery of fuel, solvents and acids. the heavy duty powder coated Hydraulic Cart allows for the unit to be lifted up to 36" (91 cm) above the ground so that contents can be emptied into a recovery comtainer for disposal.
| Name | Description | Download |
| CD-IT (55) EX (CFE) HY-C Brochure (Metric) | Technical data for CD-IT (55) EX (CFE) HY-C in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| CD-IT (55) EX (CFE) HY-C Brochure (Imperial) | Technical data for CD-IT (55) EX (CFE) HY-C in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX Vacuum Cleaners electrically operated triphase to be used in Hazardous Areas | Certification Document | descargar |
Modelos de neumáticos (aire)
II 2 G/D c IIC T6 (85oC)
LCIE 03 ATEX 6310
- Legally certified explosion proof/dust ignition proof vacuum cleaner
- Less than 10 Ohms of resistivity
- Coalescing Filter Element (CFE) for moisture removal
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for the recovery and neutralization of conductive and explosive dust into a liquid immersion bath
- Pneumatically (air) operated
- Dry recovery only
- Stainless steel AISI 304 Interceptor tank
- Recovery capacity of 1 gallon (4 liters) of dust into 5 gallons (20 liters) of liquid
- Equipped with a heavy duty powder coated Hydraulic Cart for easy emptying of recovered materials.
Stainless steel Interceptor tank and powder coated Hydraulic Cart. Less than 10 Ohms of resistivity. This unit is equipped with a Coalescing Filter Element (CFE), located upstream, for moisture removal as well as a true HEPA Filter (H14) located downstream. This unit has been designed for the recovery of metallic, conductive and explosive dusts into an immersion liquid bath such as water, parafin oil, mineral oil, etc. This unit renders any hazardous dust inert. This unit can be converted for the recovery of fuel, solvents and acids. The heavy duty powder coated Hydraulic Cart allows for the unit to be lifted up to 36" (91 cm) above the ground so that contents can be emptied into a recovery container for disposal.
| Name | Description | Download |
| SS-IT EX (HY-C) RE HEPA Brochure (Metric) | Technical data for SS-IT EX (HY-C) RE HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| SS-IT EX (HY-C) RE HEPA Brochure (Imperial) | Technical data for SS-IT EX (HY-C) RE HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX Vacuum Cleaners pneumatically (air) operated to be used in Hazardous Areas | Certification Document | descargar |
Notes:
- Los filtros HEPA - efocacia de 99,995% sobre los 0,3 microns -Probado IEST RP-CC001.3 - H14 SIPM segun el metodo EN 1822.
- Filtros ULPA -con éficacia de 99,999% sobre los 0,3 microns - Eficacia de filtracion de 99,9995% à 0,18 microns - Probado IEST RP-CC001.3 - U15 SIPM segun el metodo EN 1822
- Todos los filtros HEPA / ULPA de Tiger-Vac son probados DOP cuando son ensamblados , sea hacia ariva o hacia abajo.
- todos los filtros HEPA / ULPA de Tiger-Vac son ensamblados mecanicamente con tres pernos y un empaque especialmente concebido con el fin de prevenir cualquier fuga durante el tiempo de vida del filtro y para asegurar la seguridad del usuario.
