Aspirateurs pour ATEX Categorie 3 Zone 2 (Gaz) et Zone 22 (Poussière)
Antistatique / Avec mise à la terre
ATTENTION: Durant les conditions normales de fonctionnement, il n'y a pas de poussières explosibles dans une zone 22 ATEX. La Zone 22 n'est pas une atmosphère explosible.
Ce qu'il ne faut pas dire lorsque l'on parle d'aspirateurs certifiés ATEX:
ATEX Type 22 pour ATEX Zone 22
Aspirateur Atex pour Zone 22
Poussières dangereuses ? pour Zone 22
Aspirateur ATEX Type H pour Zone 22
L'aspirateur ATEX Zone 22 permet de récupérer une grande quantité de poussières dans la Zone 22
Aspirateur 15 ATEX (est-ce une nouvelle directive?)
Ce qu'il faut dire lorsque l'on parle d'aspirateurs certifiés ATEX:
Aspirateur ATEX Categorie 1
Aspirateur ATEX Categorie 2
Aspirateur ATEX Categorie 3
Pourquoi?
Seuls les aspirateurs certifies ATEX categories 1 ou 2 sont conçus pour récupérer d'une manière sécuritaire les poussières combustibles et conductibles, préservant ainsi la santé et la sécurité des travailleurs..
DÉFINITION D'UNE ZONE 22 D'APRÈS L'ANNEXE I DE LA DIRECTIVE ATEX 1999/92/CE
A: Zone 22
Emplacement où une atmosphère explosive sous forme de nuage de poussières combustibles n'est pas susceptible de se présenter en fonctionnement normal, ou, si elle se présente néanmoins, elle n'est que de courte durée.
B:Catégorie 3, tel que défini dans la directive 94/9/CE
Les appareils de cette catégorie sont destinée à une utilisation dans des zones où des atmosphères explosives dues à des gaz, vapeurs, les brouillards, des melanges d'air/poussières sont peu susceptibles de se produire, ou, si elles se produisent, sont susceptibles de le faire que rarement et pour une courte période uniquement.
C: Exigences concernant Ingress Protection Rating (IP) selon la norme harmonisée ATEX CEI 61241-1 Paragraphe 6
– zone 20;
– zone 21;
– zone 22 avec poussière combustible.
Enceintes protégée contre les poussières IP5X doivent être appliquées pour l'utilisation dans:
– zone 22 avec poussière non-conductive.
CRITÈRES DE SÉLECTION DES ASPIRATEURS
En fonction des zones à risque
Les catégories suivantes d'aspirateur seront notamment utilisées dans les zones indiquées:
| - Aspirateurs de la catégorie 1 - Aspirateurs de la catégorie 1 ou 2 - Aspirateurs de la catégorie1, 2 et/ou 3 |
dans la Zone 0 or 20 dans la Zone 1 or 21 dans la Zone 2 or 22 |
En fonction des applications
Les catégories suivantes d'aspirateur seront notamment utilisées dans les zones indiquées:
|
Poussières
|
Liquides
|
Category 3 Zone 22: For Janitorial Cleaning Applications, not designed to recover combustible dusts, except by accident, in insignificant quantities
Série électrique
II 3 D Ex tD A22 IP6X T100oC- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- By-Pass universal motor with tD protection
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- For dry recovery only
- Includes disposable filter bags
- Stainless steel body and recovery tank
- Ready to use: filters and tool kit included
- Equipped with 4-wheels
Stainless steel body and recovery tank. Contains a true HEPA Filter (H14) located upstream of the motor. This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts. With a powerful suction this unit is designed for industrial applications. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
| Name | Description | Download |
| ATEX-22E Brochure (Metric) | Technical data for ATEX-22E in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX-22E Brochure (Imperial) | Technical data for ATEX-22E in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 3 D Ex tD A22 IP6X T100oC- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous duty single phase brushless motor - non sparking
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Heavy duty powder coated body and stainless steel recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Equipped with a 4-wheel cart and wire tool basket
Heavy duty powder coated body and stainless steel recovery tank. Equipped with a single phase continuous duty brushless motor which is non-sparking. The unit is also equipped with a true HEPA Filter (H14) which is located upstream of the motor. This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MFS - Manual Filter Shaker System
The Manual Fitler Shaker system allows the operator to clean the main filter without having to open the vacuum cleaner. This shaker System reduces maintenance down time.
The Manual Filter Shaker System consists of a spring action mechanism operating directly onto the filter cage located inside of the filter chamber. The system is operated by pressing on the ergonomic handle located on the side or top of the filter chamber.
The Manual Filter Shaker dislodges the accumulated caked-on dust from the filter thus improving the filter’s performance.
The filter, along with the filter cage, can be easily removed from the filter chamber and washed with lukewarm water and mild detergents.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| BLSD-25L (DT) MFS HEPA Brochure (Metric) | Technical data for BLSD-25L (DT) MFS HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| BLSD-25L (DT) MFS HEPA Brochure (Imperial) | Technical data for BLSD-25L (DT) MFS HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 3 D Ex tD A22 IP6X T100oC- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous duty single phase brushless motor - non sparking
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Reverse Purge (MRP)
- Reverse Purge Cartridge - 20 ft² (18.600 cm²) - with skirt
- For dry recovery only
- Heavy duty powder coated body and stainless steel recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Equipped with a 4-wheel cart and wire tool basket
Heavy duty powder coated body and stainless steel recovery tank. Equipped with a single phase continuous duty brushless motor which is non-sparking. The unit is also equipped with a true HEPA Filter (H14) located upstream of the motor. This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts. Large Reverse Purge Cartridge - 20 ft² (18.600 cm²) - and Skirt included. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MRP - Manual Reverse Purge System
The Manual Reverse Purge (MRP) System allows the operator to not have to open the vacuum cleaner in order to clean the Cartridge. By opening the Reverse Purge Atmospheric Pressure Release Valve the Cartridge is automatically purged of dusts. This Purging System reduces maintenance down time.
The Manual Reverse Purge (MRP) works by :
1 - Closing the slider on the opening to block the suction intake orifice for approximately 5 seconds while the vacuum is running.
2 - Then quickly open Purge Valve. Air is now flowing via the valve through to the filter.
Keep Purge Valve open for 1-2 seconds then close (repeat above steps 2 or 3 times).
Reverse Purge System will cause dust to fall off of the filter.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| BLSD-25L (DT) MRP HEPA Brochure (Metric) | Technical data for BLSD-25L (DT) MRP HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| BLSD-25L (DT) MRP HEPA Brochure (Imperial) | Technical data for BLSD-25L (DT) MRP HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 3 D Ex tD A22 IP6X T100oC- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous duty single phase brushless motor - non sparking
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Powder coated body and stainless steel recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 14.5 gallons (55 liters)
- Equipped with a 4-wheel cart and wire tool basket
Powder coated body and stainless steel detachable recovery tank. Equipped with a single phase continuous duty brushless motor which is non-sparking. The unit is also equipped with a true HEPA Filter (H14) located upstream of the motor. This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts. All of our HEPA vacuum cleaner are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MFS - Manual Filter Shaker System
The Manual Fitler Shaker system allows the operator to clean the main filter without having to open the vacuum cleaner. This shaker System reduces maintenance down time.
The Manual Filter Shaker System consists of a spring action mechanism operating directly onto the filter cage located inside of the filter chamber. The system is operated by pressing on the ergonomic handle located on the side or top of the filter chamber.
The Manual Filter Shaker dislodges the accumulated caked-on dust from the filter thus improving the filter’s performance.
The filter, along with the filter cage, can be easily removed from the filter chamber and washed with lukewarm water and mild detergents.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| BLSD-55L (DT) MFS HEPA Brochure (Metric) | Technical data for BLSD-55L (DT) MFS HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| BLSD-55L (DT) MFS HEPA Brochure (Imperial) | Technical data for BLSD-55L (DT) MFS HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 3 D IP55 T125oC- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- Designed for general cleanup for the Food Industry
- Continuous duty single phase motor blower
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS) or Manual Reverse Purge (MRP)
- Reverse Purge Cartridge - 20 ft² (18.600 cm²) - with skirt
- For dry recovery only
- Heavy duty white powder coated body and stainless steel recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Unit is compact with small footprint
- Equipped with a 4-wheel cart and wire tool basket
Tiger-Vac's newest line of vacuum cleaners designed for general cleanup for the Food Industry. This unit has been specifically designed for applications where finely pulverized dust is to be recovered. Made of heavy duty white powder coated construction with a stainless steel detachable recovery tank. This unit is equipped with a true HEPA Filter (H14) located downstream outside of the motor housing. This unit is available with a choice of 2 filtration options - Manual Filter Shaker (MFS) or Manual Reverse Purge (MRP). This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)). This unit cannot be used to recover conductive or combustible dusts. Large Reverse Purge Cartridge - 20 ft² (18.600 cm²) - and Skirt included. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MFS - Manual Filter Shaker System
The Manual Fitler Shaker system allows the operator to clean the main filter without having to open the vacuum cleaner. This shaker System reduces maintenance down time.
The Manual Filter Shaker System consists of a spring action mechanism operating directly onto the filter cage located inside of the filter chamber. The system is operated by pressing on the ergonomic handle located on the side or top of the filter chamber.
The Manual Filter Shaker dislodges the accumulated caked-on dust from the filter thus improving the filter’s performance.
The filter, along with the filter cage, can be easily removed from the filter chamber and washed with lukewarm water and mild detergents.
MRP - Manual Reverse Purge System
The Manual Reverse Purge (MRP) System allows the operator to not have to open the vacuum cleaner in order to clean the Cartridge. By opening the Reverse Purge Atmospheric Pressure Release Valve the Cartridge is automatically purged of dusts. This Purging System reduces maintenance down time.
The Manual Reverse Purge (MRP) works by :
1 - Closing the slider on the opening to block the suction intake orifice for approximately 5 seconds while the vacuum is running.
2 - Then quickly open Purge Valve. Air is now flowing via the valve through to the filter.
Keep Purge Valve open for 1-2 seconds then close (repeat above steps 2 or 3 times).
Reverse Purge System will cause dust to fall off of the filter.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| CD/EUR-25L SERIES Brochure (Metric) | Technical data for CD/EUR-25L SERIES in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| CD/EUR-25L SERIES Brochure (Imperial) | Technical data for CD/EUR-25L SERIES in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 3 D IP55 T125oC- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous Duty - Single or 3-phase motor
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Stainless steel body and recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Equipped with a 4-wheel cart and wire tool basket
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MFS - Manual Filter Shaker System
The Manual Fitler Shaker system allows the operator to clean the main filter without having to open the vacuum cleaner. This shaker System reduces maintenance down time.
The Manual Filter Shaker System consists of a spring action mechanism operating directly onto the filter cage located inside of the filter chamber. The system is operated by pressing on the ergonomic handle located on the side or top of the filter chamber.
The Manual Filter Shaker dislodges the accumulated caked-on dust from the filter thus improving the filter’s performance.
The filter, along with the filter cage, can be easily removed from the filter chamber and washed with lukewarm water and mild detergents.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| HLMT-25L (DT) MFS HEPA Brochure (Metric) | Technical data for HLMT-25L (DT) MFS HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| HLMT-25L (DT) MFS HEPA Brochure (Imperial) | Technical data for HLMT-25L (DT) MFS HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 3 D IP55 T125oC- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous Duty -Single and 3-phase motor
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Reverse Purge (MRP)
- Reverse Purge Cartridge - 20 ft² (18.600 cm²) - with skirt
- For dry recovery only
- Stainless steel body and recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Equipped with a 4-wheel cart and wire tool basket
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MRP - Manual Reverse Purge System
The Manual Reverse Purge (MRP) System allows the operator to not have to open the vacuum cleaner in order to clean the Cartridge. By opening the Reverse Purge Atmospheric Pressure Release Valve the Cartridge is automatically purged of dusts. This Purging System reduces maintenance down time.
The Manual Reverse Purge (MRP) works by :
1 - Closing the slider on the opening to block the suction intake orifice for approximately 5 seconds while the vacuum is running.
2 - Then quickly open Purge Valve. Air is now flowing via the valve through to the filter.
Keep Purge Valve open for 1-2 seconds then close (repeat above steps 2 or 3 times).
Reverse Purge System will cause dust to fall off of the filter.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| HLMT-25L (DT) MRP HEPA Brochure (Metric) | Technical data for HLMT-25L (DT) MRP HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| HLMT-25L (DT) MRP HEPA Brochure (Imperial) | Technical data for HLMT-25L (DT) MRP HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 3 D IP55 T125oC- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Continuous Duty - Single or 3-phase motor
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Stainless steel body and recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 14.5 gallons (55 liters)
- Equipped with a 4-wheel cart and wire tool basket
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MFS - Manual Filter Shaker System
The Manual Fitler Shaker system allows the operator to clean the main filter without having to open the vacuum cleaner. This shaker System reduces maintenance down time.
The Manual Filter Shaker System consists of a spring action mechanism operating directly onto the filter cage located inside of the filter chamber. The system is operated by pressing on the ergonomic handle located on the side or top of the filter chamber.
The Manual Filter Shaker dislodges the accumulated caked-on dust from the filter thus improving the filter’s performance.
The filter, along with the filter cage, can be easily removed from the filter chamber and washed with lukewarm water and mild detergents.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| HLMT-55L (DT) MFS HEPA Brochure (Metric) | Technical data for HLMT-55L (DT) MFS HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| HLMT-55L (DT) MFS HEPA Brochure (Imperial) | Technical data for HLMT-55L (DT) MFS HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
- Ideal for the recovery bulky and lightweight scrap material
- Can be connected to process machines
- Continuous duty single and 3-phase motor
- Sight glass to monitor collection bag capacity
- For dry recovery only
- Powder coated steel construction. Stainless Steel AISI 304 available upon request
- Equipped with 4 wheels
| Name | Description | Download |
| SRV-55 Brochure (Metric) | Technical data for SRV-55 in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| SRV-55 Brochure (Imperial) | Technical data for SRV-55 in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
Category 3 Zone 22: For Janitorial Cleaning Applications, not designed to recover combustible dusts, except by accident, in insignificant quantities
Série Pneumatique (à l'air)
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- For dry recovery
- Stainless steel body and recovery tank. Recovery capacity of 10 gallons (38 liters)
- Includes Disposable Filter Bags
- Ready to use: filters and SD* tool kit included
- Equipped with SD* 4-wheels
*SD - Static Dissipative
Stainless steel body and recovery tank. Contains a true HEPA Filter (H14) located upstream. This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts or flammable liquids. With a powerful suction this unit is designed for industrial applications. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
| Name | Description | Download |
| ATEX-12A Brochure (Metric) | Technical data for ATEX-12A in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX-12A Brochure (Imperial) | Technical data for ATEX-12A in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Heavy duty powder coated body and stainless steel recovery tank.
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Equipped with a 4-wheel cart and wire tool basket
Heavy duty powder coated body with a stainless steel detachable recovery tank. Equipped with a true HEPA Filter (H14). This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MFS - Manual Filter Shaker System
The Manual Fitler Shaker system allows the operator to clean the main filter without having to open the vacuum cleaner. This shaker System reduces maintenance down time.
The Manual Filter Shaker System consists of a spring action mechanism operating directly onto the filter cage located inside of the filter chamber. The system is operated by pressing on the ergonomic handle located on the side or top of the filter chamber.
The Manual Filter Shaker dislodges the accumulated caked-on dust from the filter thus improving the filter’s performance.
The filter, along with the filter cage, can be easily removed from the filter chamber and washed with lukewarm water and mild detergents.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| AVSD-25L (DT) MFS HEPA Brochure (Metric) | Technical data for AVSD-25L (DT) MFS HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| AVSD-25L (DT) MFS HEPA Brochure (Imperial) | Technical data for AVSD-25L (DT) MFS HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Reverse Purge (MRP)
- For dry recovery only
- Heavy duty powder coated body and stainless steel recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Equipped with a 4-wheel cart and wire tool basket
Heavy duty powder coated body with a stainless steel detachable recovery tank. Equipped with a true HEPA Filter (H14). This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts. Large Reverse Purge Cartridge and Skirt included. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MRP - Manual Reverse Purge System
The Manual Reverse Purge (MRP) System allows the operator to not have to open the vacuum cleaner in order to clean the Cartridge. By opening the Reverse Purge Atmospheric Pressure Release Valve the Cartridge is automatically purged of dusts. This Purging System reduces maintenance down time.
The Manual Reverse Purge (MRP) works by :
1 - Closing the slider on the opening to block the suction intake orifice for approximately 5 seconds while the vacuum is running.
2 - Then quickly open Purge Valve. Air is now flowing via the valve through to the filter.
Keep Purge Valve open for 1-2 seconds then close (repeat above steps 2 or 3 times).
Reverse Purge System will cause dust to fall off of the filter.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| AVSD-25L (DT) MRP HEPA Brochure (Metric) | Technical data for AVSD-25L (DT) MRP HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| AVSD-25L (DT) MRP HEPA Brochure (Imperial) | Technical data for AVSD-25L (DT) MRP HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- For dry recovery
- Ready to use: filters and SD* kit included
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 14.5 gallons (55 liters)
- Equipped with a SD* wheel cart and canvas tool baskets
*SD - Static Dissipative
Stainless steel body and recovery tank. Contains a true HEPA Filter (H14) located upstream. This unit is static dissipating and conductive (Category 3 - Zone 22 (Dust)) and can be used for general maintenance. This unit cannot be used to recover conductive or combustible dusts or flammable liquids. With a powerful suction this unit is designed for industrial applications. All of our HEPA vacuum cleaners are DOP Leak Tested before leaving our facility.
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| ATEX-55L Brochure (Metric) | Technical data for ATEX-55L in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| ATEX-55L Brochure (Imperial) | Technical data for ATEX-55L in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Filter Shaker (MFS)
- For dry recovery only
- Heavy duty white powder coated body and stainless steel recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 17 gallons (65 liters)
- Equipped with a 4-wheel cart and tool basket
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MFS - Manual Filter Shaker System
The Manual Fitler Shaker system allows the operator to clean the main filter without having to open the vacuum cleaner. This shaker System reduces maintenance down time.
The Manual Filter Shaker System consists of a spring action mechanism operating directly onto the filter cage located inside of the filter chamber. The system is operated by pressing on the ergonomic handle located on the side or top of the filter chamber.
The Manual Filter Shaker dislodges the accumulated caked-on dust from the filter thus improving the filter’s performance.
The filter, along with the filter cage, can be easily removed from the filter chamber and washed with lukewarm water and mild detergents.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| CS-65L (MFS) RE HEPA Brochure (Metric) | Technical data for CS-65L (MFS) RE HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| CS-65L (MFS) RE HEPA Brochure (Imperial) | Technical data for CS-65L (MFS) RE HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static Dissipating and Conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Reverse Purge (MRP)
- Reverse Purge Cartridge - 20 ft² (18.600 cm²) - and skirt
- For dry recovery only
- Heavy duty white powder coated body and stainless steel recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 17 gallons (65 liters)
- Equipped with a 4-wheel cart and tool basket
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MRP - Manual Reverse Purge System
The Manual Reverse Purge (MRP) System allows the operator to not have to open the vacuum cleaner in order to clean the Cartridge. By opening the Reverse Purge Atmospheric Pressure Release Valve the Cartridge is automatically purged of dusts. This Purging System reduces maintenance down time.
The Manual Reverse Purge (MRP) works by :
1 - Closing the slider on the opening to block the suction intake orifice for approximately 5 seconds while the vacuum is running.
2 - Then quickly open Purge Valve. Air is now flowing via the valve through to the filter.
Keep Purge Valve open for 1-2 seconds then close (repeat above steps 2 or 3 times).
Reverse Purge System will cause dust to fall off of the filter.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| CS-65L (MRP) RE HEPA Brochure (Metric) | Technical data for CS-65L (MRP) RE HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| CS-65L (MRP) RE HEPA Brochure (Imperial) | Technical data for CS-65L (MRP) RE HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated
- Static dissipating and conductive (Category 3 - Zone 22 (Dust))
- Available with Manual Reverse Purge (MRP)
- Reverse Purge Cartridge - 20 ft² (18.600 cm²) and skirt
- For dry recovery only
- Heavy duty powder coated body and recovery tank
- Detachable recovery tank (DT) for easy disposal of recovered materials. Recovery capacity of 6.6 gallons (25 liters)
- Equipped with a 4-wheel cart and tool basket
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
MRP - Manual Reverse Purge System
The Manual Reverse Purge (MRP) System allows the operator to not have to open the vacuum cleaner in order to clean the Cartridge. By opening the Reverse Purge Atmospheric Pressure Release Valve the Cartridge is automatically purged of dusts. This Purging System reduces maintenance down time.
The Manual Reverse Purge (MRP) works by :
1 - Closing the slider on the opening to block the suction intake orifice for approximately 5 seconds while the vacuum is running.
2 - Then quickly open Purge Valve. Air is now flowing via the valve through to the filter.
Keep Purge Valve open for 1-2 seconds then close (repeat above steps 2 or 3 times).
Reverse Purge System will cause dust to fall off of the filter.
DT - Detachable Recovery Tank
Many of our vacuum cleaners come equipped with a detachable tank for the easy disposal of recovered materials. Our detachable tanks range in size from 20 to 160 liters (5.28 gal to 42.25 gal) and are available in stainless steel or powder coated, with or without wheels for maneuverability.
| Name | Description | Download |
| CS-11 (DT) Brochure (Metric) | Technical data for CS-11 (DT) in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| CS-11 (DT) Brochure (Imperial) | Technical data for CS-11 (DT) in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
II 2 G/D c IIC T6 (85oC)
- HEPA Filter - Included with an efficiency of 99.995% on 0.3 micron. Tested: IEST RP-CC001.3. H14 by MPPS method as per EN 1822.
- For general cleanup
- Pneumatically (air) operated. Single or twin venturi for higher power
- For wet and dry recovery. Designed to recover large spills
- Heavy duty powder coated body. Liquid recovery capacity of 55 gallons (209 liters)
- Tilt cart (TC) for easy emptying of recovered materials
HEPA - High Efficiency Particulate Air Filter
A HEPA filter is a type of air filter, which means it filters the air coming in or out of the vacuum cleaner system. It can remove at least 99.99% of dust, pollen, mould, bacteria and any other airborn particles with a size of 0.3 micron or larger.
North-America: Each HEPA Filter has a minimum filtration efficiency of 99.99% on 0.3 micron. Tested as per IES-RP-CC001.3.
Europe: Each HEPA Filter has a minimum filtration efficiency of 99.995% on 0.3 micron, rated H14 as per EN 1822 by MPPS method.
Click here to download Tiger-Vac's HEPA Filter's standards chart.
TC - Tilting Cart
Many of our vacuum cleaners are equipped with a tilting cart for easy maneuverability and for quick disposal of recovered materials. A lever located on the the cart allows the recovery drum to be tilted backwards without having to remove the powerhead. Tilting carts are available in stainless steel or powder coated.
| Name | Description | Download |
| CS-55 (TC) RE HEPA Brochure (Metric) | Technical data for CS-55 (TC) RE HEPA in metric units (Millimeters, Kilograms...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
| CS-55 (TC) RE HEPA Brochure (Imperial) | Technical data for CS-55 (TC) RE HEPA in imperial units (Inches, Pounds...) | Brochure Letter (8½" × 11") Brochure A4 (210mm × 297mm) |
Notes:
- Les filtres HEPA - efficacité de 99,995% sur les 0,3 microns - Testé IEST RP-CC001.3 - H14 SIPM selon la méthode EN 1822.
- ULPA Filters - efficacité de 99,999% sur les 0,3 microns - Filtration efficacité de 99,9995% à 0,18 microns - Testé IEST RP-CC001.3 - U15 SIPM selon la méthode EN 1822
- Tous les filtres HEPA / ULPA de Tiger-Vac sont testés DOP lors de l'assemblage, soit en amont ou en aval, à l'intérieur de l'aspirateur.
- Tous les filtres HEPA / ULPA de Tiger-Vac sont assemblés mécaniquement avec 3 boulons et inclus un joint mémoire spécialement conçus afin de prévenir toute fuite pendant la durée de vie du joint d'étanch pour assurer la santé et la sécurité de l'utilisateur final.
ATTENTION:
Ce qu'il ne faut pas dire lorsque l'on parle d'aspirateurs certifiés ATEX:
<!--[endif]-->ATEX Type 22 pour ATEX Zone 22
<!--[endif]-->Aspirateur Atex pour Zone 22
<!--[endif]-->Poussières dangereuses ? pour Zone 22
<!--[endif]-->Aspirateur ATEX Type H pour Zone 22
<!--[endif]-->L'aspirateur ATEX Zone 22 permet de récupérer une grande quantité de poussières dans la Zone 22
<!--[endif]-->Aspirateur 15 ATEX (est-ce une nouvelle directive?)
Ce qu'il faut dire lorsque l'on parle d'aspirateurs certifiés ATEX:
<!--[endif]-->Aspirateur ATEX Categorie 1
<!--[endif]--> Aspirateur ATEX Categorie 2
<!--[endif]--> Aspirateur ATEX Categorie 3
Pourquoi?
Seuls les aspirateurs certifies ATEX categories 1 ou 2 sont conçus pour récupérer d'une manière sécuritaire les poussières combustibles et conductibles, préservant ainsi la santé et la sécurité des travailleurs..
